Dual 10ft Backlit Panels | TenseLight Twin LED Wall
- As Configured: $0.00
- Shipping Fee: Free Shipping
- Total Price: $0.00
Couldn't load pickup availability
Have questions?
Artwork Template
Easy Ordering Process
Select the product
Check the price & Select options
Upload artwork / Request design
Approve artwork
Check out & Get proof
Enjoy your product
10x20 TenseLight Backlit Trade Show Booth A
Build a flexible 10x20 illuminated booth with two 10ft TenseLight™ backlit panels. Use both panels together as a wide 20ft-class glowing brand wall, or separate them into two independent 10ft displays for smaller booths, sponsor zones, product launches, and repeat event programs.
A 10x20 Backlit Booth Built from Two 10ft Panels
This TenseLight™ booth includes two 10ft backlit display panels that can be placed side by side to create a wide 20ft-class illuminated brand wall, or used separately as two independent 10ft displays for smaller events, sponsor zones, check-in areas, or repeat roadshows.
Command attention with a backlit booth system that adapts to more than one event format. The two-panel structure gives your team brighter booth visuals, reusable layouts, sponsor messaging flexibility, and portable illuminated branding for different event spaces.
This version includes two hardcase-to-podium units as part of the standard kit, giving your booth two branded front-of-booth surfaces for lead capture, brochures, QR prompts, product category messaging, or quick sales conversations.
Display Size Guide
Each backlit panel is approximately 120" W × 90" H.
When both panels are placed together, they create an approximately 240" W × 90" H 20ft-class display for many 10x20 exhibit spaces.
Final visible size, panel spacing, graphic alignment, and center-joint treatment should be confirmed during proofing.
Artwork Template Size
Each 10ft panel has a front print area of approximately 120.4" W × 89.7" H.
Each 10ft panel has a back print area of approximately 120.4" W × 89.7" H.
If you are using both panels together as one 20ft wall, design the two graphics as a coordinated left-and-right visual system.
Keep logos, faces, QR codes, sponsor marks, fine text, and key product details inside the safe visible area shown on the official artwork template.
Design Around the Center Split
When using the two panels as one 20ft wall, avoid placing faces, small text, QR codes, thin lines, or important logo details directly across the center joint.
Keep the main headline readable on one side, or design the artwork so the split feels intentional.
For the cleanest 20ft wall look, use large visuals, bold color blocks, and simple left-to-right storytelling instead of tiny details across both panels.
Use It as One Wall or Two Separate Displays
One 20ft-Class Wall
Use both panels together for a wide 10x20 trade show wall, product launch backdrop, sponsor wall, or premium illuminated brand anchor.
Two Independent 10ft Displays
Separate the panels into two 10ft backlit displays for smaller booths, check-in areas, sponsor corners, product demo zones, hallway signage, or multi-city events.
Two Hardcase-to-Podium Units Included
This product includes two hardcase-to-podium units as part of the standard kit. They are not optional upgrades.
Use the branded podiums as reception counters, QR lead capture stations, brochure points, product category prompts, sample handoff surfaces, or front-of-booth conversation areas.
After the event, the hardcases help protect and transport the display components between shows.
Hardcase Graphic Area
Hardcase wrap print area: approximately 107" W × 42.9" H.
Use this space for your logo, booth number, short CTA, QR code, website, sponsor message, product category label, or simple front-of-booth branding.
Keep important details centered within the safe visible area shown on the final proof.
What This Kit Includes
- 2 × 10ft flat aluminum snap-tube frames
- 2 × LED rollable light panel arrays
- 2 × High-resolution seamless fabric prints
- 2 × Nylon duffel bags
- 2 × Hardcase-to-podium units with custom printed graphics, included as standard
Furniture, flooring, TV stands, monitors, shelves, extra counters, media players, extension cords, power strips, and additional accessories are not included unless selected or quoted separately.
Product Specifications
| Product Name | 10x20 TenseLight Backlit Trade Show Booth A |
|---|---|
| Booth Type | Dual-panel TenseLight™ backlit display system for flexible 10x20 exhibit layouts |
| Panel Quantity | 2 independent 10ft backlit panels |
| Single Panel Display Size | Approx. 120" W × 90" H |
| Combined Display Size | Approx. 240" W × 90" H when both panels are placed together |
| Panel Print Area | Front print area: approx. 120.4" W × 89.7" H per panel. Back print area: approx. 120.4" W × 89.7" H per panel. |
| Hardcase-to-Podium Print Area | Approx. 107" W × 42.9" H per podium wrap |
| Frame | Anodized aluminum snap-tube frame |
| Graphic | Wrinkle-free seamless tension fabric for backlit display use |
| Printing | High-resolution heat transfer printing |
| Lighting | 2 LED rollable light panel arrays |
| Cases | 2 hardcase-to-podium units with custom printed graphics, included as standard |
| Bags | 2 nylon duffel bags |
| Weight Note | Product page lists weight as 160 lbs with nylon bag packaging. Please confirm whether this refers to the full kit, packed weight, or per-shipment weight before freight planning. |
| Power Requirement | Power is required for the backlit panels. Confirm venue electrical access, outlet location, extension cord rules, and cable routing before the event. |
| Recommended Use | Indoor trade shows, convention centers, hotel ballroom exhibits, corporate events, sponsor areas, product launches, recruiting events, and controlled showroom-style environments |
| Outdoor Use Note | Best for indoor and controlled event spaces. Avoid wind, rain, moisture, unstable power access, uneven ground, and unsupervised outdoor use. |
| Production & Shipping Timeline | 9 business days after artwork approval |
| Replacement Graphics | Available for future campaigns, launches, sponsor programs, recruiting seasons, annual conferences, or refreshed branding |
| Artwork Planning Note | If using both panels together as one wall, avoid placing critical design elements directly across the center joint. |
This Kit vs. a One-Piece 20ft Backlit Wall
Choose This Dual-Panel Kit When...
You want flexible layouts, easier split-use planning, and the option to use two separate 10ft displays for smaller events or different event zones.
Choose a One-Piece 20ft Wall When...
Your priority is a more continuous full-wall look with fewer visual breaks and one uninterrupted graphic surface.
TenseLight™ vs. Standard TenseFlex™ Backdrops
TenseFlex™
A non-backlit tension fabric display for lightweight branding, basic booth walls, and simple fabric graphics.
TenseLight™
Adds internal backlit illumination, helping graphics appear brighter and more visible in convention halls, hotel ballrooms, product showcases, and high-traffic trade show aisles.
TenseLight™ A vs. EdgeLumi™ Booth Kits
Choose EdgeLumi™ When...
You need multiple illuminated zones, counters, side walls, arch-style structures, or a more dimensional modular lightbox environment.
Choose This TenseLight™ Kit When...
You want a clean dual-panel backlit wall that can work as one wide 20ft display or two separate 10ft displays.
Backlit Wall, Not a TV Booth
This display is built for illuminated graphics, sponsor branding, product visuals, and photo-friendly booth backgrounds.
It does not include a TV stand. If your main goal is video demos, compare with a TV media booth kit instead.
Two Panels, More Event Uses
Create one large brand wall, split the panels into two sponsor displays, use one panel for a product story and the other for a campaign message, or place them in separate event zones when your booth plan changes.
This is especially useful for teams that attend different types of events throughout the year.
Two Graphic Layout Options
One Wide Wall
Design the two panels as a continuous left-to-right brand story, keeping the center split clean and intentional.
Flexible Events
Design each panel as a standalone 10ft display with its own headline and visual, so either panel can still work independently at smaller shows.
Recommended 10x20 Booth Flow
Place both 10ft backlit panels along the rear of your 10x20 booth to create a bright visual anchor.
Keep the front area open for conversations, product samples, QR scans, photos, and lead capture.
If using the panels separately, keep each panel close to the message or activity it supports.
Backlit Design Tip
Backlit graphics work best with bold contrast, large readable type, clean color blocks, and high-resolution images.
Avoid dark-heavy layouts, thin gray text, crowded feature lists, or small details that may lose clarity when illuminated.
Keep the Message Big and Simple
Treat the display like an illuminated billboard.
Use one strong headline, one clear product promise, and one hero visual. Save long product details, comparison charts, QR codes, and small disclaimers for counters, podiums, brochures, handouts, or nearby signage.
Power Planning Reminder
Because this is a backlit display system, power planning should be confirmed before the show.
Check outlet access, electrical order deadlines, extension cord rules, cable routing, venue safety requirements, and any show labor restrictions before move-in day.
Keep cords behind the display or along approved booth paths where visitors will not walk.
4-Step Setup Planning
This kit is designed to work as one coordinated 20ft-class wall or as two separate 10ft illuminated displays.
Build the Two Frames
Assemble both 10ft aluminum snap-tube frames and place them according to your booth layout.
Install LED Panels
Install the LED rollable light panel arrays and check lighting coverage before adding the final graphics.
Add Fabric Graphics
Install the two backlit fabric prints and align the artwork across the center joint if using one wide wall.
Place Podiums and Check Power
Set up the two hardcase-to-podium counters, route cables safely, and review the lit display from the aisle.
Who Should Use This Dual-Panel Backlit Booth?
Best For
Technology exhibitors, healthcare marketers, beauty and wellness brands, education programs, franchise teams, sponsor-driven events, corporate roadshows, product launch teams, retail activation teams, nonprofit outreach programs, conference exhibitors, local business groups, and teams that need one bright 20ft wall for large shows and two separate 10ft displays for smaller events.
Not Ideal For
Teams that need a single uninterrupted 20ft lightbox wall, TV demo structures, product shelves, outdoor weather-exposed setups, venues without power access, or simple non-lit backdrop needs.
Where It Works Best
- Las Vegas trade shows
- Orlando healthcare expos
- Chicago convention halls
- Anaheim beauty shows
- New York product launches
- Austin tech conferences
- Hotel ballroom exhibits
- University recruiting fairs
- Franchise expos
- Regional business expos
- Sponsor walls
- Retail activations
- Nonprofit awareness events
- Corporate roadshows
- Local chamber shows
- Multi-city demo programs
- Conference sponsor areas
- Product launch backdrops
Reusable Panels, Refreshable Graphics
Keep the two backlit panel structures, hardcase-to-podium units, LED panel arrays, and nylon bags, then refresh the graphics for new campaigns, sponsor programs, product launches, recruiting seasons, annual conferences, or regional events.
Replacement graphics let the same display system support different teams and event messages without replacing the full kit.
Recommended Use
Best for indoor trade shows, convention centers, hotel ballroom exhibits, corporate events, sponsor areas, product launches, recruiting events, and controlled showroom-style environments.
Outdoor or semi-outdoor use should avoid wind, rain, moisture, unstable power access, uneven ground, wet floors, and unsupervised setup.
Best Fit Note
This kit is best for brands that want flexible backlit visibility in a 10x20 booth or across two separate 10ft spaces.
If you only need a simple non-lit wall, choose a TenseFlex™ display. If you need product shelves, choose a showcase booth. If you need video content, choose a TV media booth. If you need a more continuous single-wall lightbox look, consider a larger one-piece backlit wall.
Key Benefits
- Two 10ft Backlit Panels Use together as a 20ft-class wall or separately as two independent illuminated displays.
- Flexible 10x20 Layout Works as one wide booth wall, two sponsor zones, product demo backdrops, or separate event displays.
- Approx. 240" × 90" Combined Size Creates a bright full-width booth anchor for many 10x20 exhibit spaces.
- LED Rollable Light Panels Internal illumination helps graphics stand out in convention halls and hotel ballroom exhibits.
- Two Hardcase Podiums Included Two hardcase-to-podium units are included as standard for reception, QR scans, brochures, and lead capture.
- Center Split Design Control Design around the middle joint to keep logos, faces, QR codes, and small text readable.
- Refreshable Graphics Replacement graphics are available for campaigns, launches, sponsor programs, and rebrands.
- 9 Business Day Timeline Production and shipping timeline is 9 business days after artwork approval.
Production Timing Reminder
This product currently requires 9 business days for production and shipping after artwork approval.
If your event date is fixed, please confirm artwork approval timing, delivery deadline, shipping address, advance warehouse requirements, booth number labels, and venue power access before placing your order.
FAQ
What size is this display?
Each panel is approximately 120" W × 90" H. When both panels are placed together, the display creates an approximately 240" W × 90" H 20ft-class backlit wall.
Is this one 20ft display or two 10ft displays?
It includes two 10ft backlit panels. You can use them together as one wide wall or separately as two independent displays.
What is the artwork size?
Each panel has a front print area of approximately 120.4" W × 89.7" H and a back print area of approximately 120.4" W × 89.7" H.
What is included?
The kit includes 2 10ft frames, 2 LED rollable light panel arrays, 2 fabric prints, 2 nylon duffel bags, and 2 hardcase-to-podium units with custom printed graphics as standard.
Are hardcase-to-podium counters included?
Yes. This version includes 2 hardcase-to-podium units with custom printed graphics as part of the standard kit. They are not optional upgrades.
What is the hardcase graphic size?
The hardcase wrap print area is approximately 107" W × 42.9" H. Please keep important details centered inside the safe visible area on the final proof.
Is this a backlit booth?
Yes. It is a TenseLight™ backlit display system with LED light panel arrays, not a standard non-lit fabric wall.
Can I use only one panel?
Yes. Each 10ft panel can be used separately when you need a smaller display, sponsor wall, check-in backdrop, or product demo area.
Does it need power?
Yes. Power is required for the backlit panels. Confirm venue electrical access, extension cord rules, cable routing, and show labor requirements before the event.
Is it suitable for a 10x20 booth space?
Yes. Both panels together are designed for many 10x20 exhibit layouts, but always confirm show rules, booth depth, height limits, center placement, and power access.
Is it for outdoor use?
It is best for indoor and controlled event spaces. Avoid wind, rain, moisture, unstable power access, uneven ground, and unsupervised outdoor use.
Can I order replacement graphics later?
Yes. Replacement graphics can be ordered for future campaigns, launches, sponsor programs, recruiting seasons, or refreshed branding.
What artwork files should I upload?
Print-ready AI, PDF, PSD, EPS, TIFF, JPG, or high-resolution PDF files are recommended. Use the official template and keep important content inside the safe visible area.
Ready to Build a Flexible Backlit Booth?
Upload your logo, campaign visuals, or design references, and our team can help prepare artwork for both 10ft panels and both hardcase-to-podium graphics. Tell us whether you plan to use the panels together as one wide 20ft wall or separately as two displays, and share your event date, delivery address, power access, artwork status, and layout preference so we can help confirm the best production plan.